Moduline 1™

Moduline 1™

Modular design - just perfect results.

POWER »Moduline 1™« comprises of an insert frame joint with tongue and groove, whose vibration behavior on the one hand helps to achieve improved compaction of the concrete, and on the other hand, due to the decoupled insert, it achieves a damping effect, which can reduce wear of the mold.

Moduline 1™

The four-piece frame is strengthened by polygonal profiles in the corners and is bolted around the insert. It is thus possible to replace the insert and to continue to use the frame. The wear plates are also bolted and can be replaced separately.

Facts & advantages:

  • Maximum mold accuracy due to internal KOBRA quality standard
  • Special cavity geometry for uninterrupted hardness development
  • Modular concept enables replacement of wearing parts
  • Higher cost efficiency due to reusability of the frame
  • Replaceable bolted wear plates

The matching frame for any insert.

Molds with Moduline 1™.

Years ago, KOBRA was the first mold maker in the industry to revolutionize the manufacturing of concrete block molds by implementing its proprietary milling technology. We have set a new level of quality with our products.

Our experienced staff use state-of-the-art technology in a customer-oriented way to develop and manufacture your reliable tool for first-grade concrete products – for any paver or block and for any block making machine, 100% reproducible.



Pavers are completely customizable in terms of format, surface texture, installation pattern and coloring and at the same time must satisfy the highest loading capacity, slip resistance, noise mitigation or water infiltration standards.

Permeable (or drainage) pavers are characterized in particular by their ability to allow rainwater to quickly infiltrate the pavement surface into the soil. The wide joint pattern compared to other paved surfaces enhances water percolation enormously

Particular projects require individual solutions. Do you need curbs with vertical and horizontal displacement protection, large format systems with false joints or contours in the underside of the block?

Wall and soil retention blocks can be used for multifunctional purposes and are of central importance both in private and public spaces as design and functional elements.

For perfect results

Best in precision

With the KOBRA hardness standards, extremely high hardness can be achieved and thus particularly robust and wear-resistant concrete block molds can be produced. Different hardening processes are used, depending on the mold technology, helping to achieve smooth production processes.

Further development of the in-house carbo hardening technology enables the surface hardness to be increased to 68 HRC.

»Optimill nitroTM« MOLD describes the nitriding process that can be used primarily for mold inserts that are high, welded and are particularly susceptible to warping.

For specific requirements

Best in pracitcal details

The stone´s product quality can be increased by the installation of KOBRA FEATURES into the concrete block mold. Each product has its individual and special demands on the mold. In order to meet these requirements, we have developed useful features, which optimally support your production processes.

The single piece »Singlebolt™« plunger is the logical continuation of the KOBRA modular system.
TOP
(Datenschutzerklärung)